Replace dump1090 with readsb.

stage4/32-pisdr-dump1090/00-run.sh

@@ -2,13 +2,141 @@
 
 on_chroot << EOF
 mkdir -p    "/home/${FIRST_USER_NAME}/PiSDR/Software"
-cd 		    "/home/${FIRST_USER_NAME}/PiSDR/Software"
+cd          "/home/${FIRST_USER_NAME}/PiSDR/Software"
 
 if [ ! -d "dump1090" ]; then
-    git clone --depth 1 https://github.com/antirez/dump1090.git
+    mkdir -p "/home/${FIRST_USER_NAME}/PiSDR/Software/dump1090"
 fi
 
+install -v -o 1000 -g 1000 -m 755 targets/enable.sh "${ROOTFS_DIR}/home/${FIRST_USER_NAME}/PiSDR/Software/dump1090"
+install -v -o 1000 -g 1000 -m 755 targets/disable.sh "${ROOTFS_DIR}/home/${FIRST_USER_NAME}/PiSDR/Software/dump1090"
+install -v -o 1000 -g 1000 -m 755 targets/configure_rbfeeder.sh "${ROOTFS_DIR}/home/${FIRST_USER_NAME}/PiSDR/Software/dump1090"
+install -v -o 1000 -g 1000 -m 755 targets/configure_fr24feed.sh "${ROOTFS_DIR}/home/${FIRST_USER_NAME}/PiSDR/Software/dump1090"
+
 cd dump1090
-make -j$(nproc)
-cp dump1090 /usr/bin/   
+
+repository="https://github.com/wiedehopf/readsb.git"
+
+apt-get update
+apt-get install --no-install-recommends --no-install-suggests -y git build-essential debhelper libusb-1.0-0-dev \
+    pkg-config dh-systemd libncurses5-dev lighttpd zlib1g-dev zlib1g unzip
+
+rm -rf "$ipath"/git
+if ! git clone --branch stale --depth 1 "$repository" "$ipath/git"
+then
+    echo "Unable to git clone the repository"
+    exit 1
+fi
+
+rm -rf "$ipath"/readsb*.deb
+
+cd "$ipath/git"
+
+sed -i 's/librtlsdr0, librtlsdr-dev, //g' debian/control
+
+export DEB_BUILD_OPTIONS=noddebs
+if ! dpkg-buildpackage -b -Prtlsdr -ui -uc -us
+then
+    echo "Something went wrong building the debian package, exiting!"
+    exit 1
+fi
+
+echo "Installing the Package"
+if ! dpkg -i ../readsb_*.deb
+then
+    echo "Something went wrong installing the debian package, exiting!"
+    exit 1
+fi
+echo "Package installed!"
+
+cp -n debian/lighttpd/* /etc/lighttpd/conf-available
+
+# script to change gain
+
+mkdir -p /usr/local/bin
+cat >/usr/local/bin/readsb-gain <<"EOF"
+#!/bin/bash
+gain=$(echo $1 | tr -cd '[:digit:].-')
+if [[ $gain == "" ]]; then echo "Error, invalid gain!"; exit 1; fi
+if ! grep gain /etc/default/readsb &>/dev/null; then sed -i -e 's/RECEIVER_OPTIONS="/RECEIVER_OPTIONS="--gain 49.6 /' /etc/default/readsb; fi
+sudo sed -i -E -e "s/--gain .?[0-9]*.?[0-9]* /--gain $gain /" /etc/default/readsb
+sudo systemctl restart readsb
+EOF
+chmod a+x /usr/local/bin/readsb-gain
+
+# set-location
+cat >/usr/local/bin/readsb-set-location <<"EOF"
+#!/bin/bash
+
+lat=$(echo $1 | tr -cd '[:digit:].-')
+lon=$(echo $2 | tr -cd '[:digit:].-')
+
+if ! awk "BEGIN{ exit ($lat > 90) }" || ! awk "BEGIN{ exit ($lat < -90) }"; then
+	echo
+	echo "Invalid latitude: $lat"
+	echo "Latitude must be between -90 and 90"
+	echo
+	echo "Example format for latitude: 51.528308"
+	echo
+	echo "Usage:"
+	echo "readsb-set-location 51.52830 -0.38178"
+	echo
+	exit 1
+fi
+if ! awk "BEGIN{ exit ($lon > 180) }" || ! awk "BEGIN{ exit ($lon < -180) }"; then
+	echo
+	echo "Invalid longitude: $lon"
+	echo "Longitude must be between -180 and 180"
+	echo
+	echo "Example format for latitude: -0.38178"
+	echo
+	echo "Usage:"
+	echo "readsb-set-location 51.52830 -0.38178"
+	echo
+	exit 1
+fi
+
+echo
+echo "setting Latitude: $lat"
+echo "setting Longitude: $lon"
+echo
+if ! grep -e '--lon' /etc/default/readsb &>/dev/null; then sed -i -e 's/DECODER_OPTIONS="/DECODER_OPTIONS="--lon -0.38178 /' /etc/default/readsb; fi
+if ! grep -e '--lat' /etc/default/readsb &>/dev/null; then sed -i -e 's/DECODER_OPTIONS="/DECODER_OPTIONS="--lat 51.52830 /' /etc/default/readsb; fi
+sed -i -E -e "s/--lat .?[0-9]*.?[0-9]* /--lat $lat /" /etc/default/readsb
+sed -i -E -e "s/--lon .?[0-9]*.?[0-9]* /--lon $lon /" /etc/default/readsb
+systemctl restart readsb
+EOF
+chmod a+x /usr/local/bin/readsb-set-location
+
+echo --------------
+cd "$ipath"
+
+wget -O tar1090-install.sh https://raw.githubusercontent.com/wiedehopf/tar1090/master/install.sh
+bash tar1090-install.sh /run/readsb
+
+if ! systemctl show readsb | grep 'ExecMainStatus=0' -qs; then
+    echo --------------
+    echo --------------
+    journalctl -u readsb | tail -n30
+    echo --------------
+    echo --------------
+    echo "ERROR: readsb service didn't start, if inquiring about the issue please post the above 30 lines of log!"
+    echo "       common issues: SDR not plugged in."
+    echo "       the webinterface will show an error until readsb is running!"
+    echo --------------
+fi
+
+echo --------------
+
+echo "[PiSDR] Disabling services. To enable them, run 'bash enable.sh'."
+
+systemctl disable --now readsb
+systemctl disable --now tar1090
+systemctl disable --now lighttpd
+
+echo "[PiSDR] Deleting build files to save space."
+
+rm -fr /usr/local/share/tar1090/git-db
+rm -fr /usr/local/share/tar1090/git
+
 EOF

stage4/32-pisdr-dump1090/targets/configure_fr24feed.sh

@@ -0,0 +1,27 @@
+#!/bin/bash
+
+# configure fr24feed to use readsb
+
+systemctl stop fr24feed &>/dev/null
+
+rm -f /etc/lighttpd/conf-enabled/89-dump1090.conf
+
+apt-get remove -y dump1090-mutability &>/dev/null
+apt-get remove -y dump1090 &>/dev/null
+apt-get remove -y dump1090-fa &>/dev/null
+
+if [ -f /etc/fr24feed.ini ]
+then
+	chmod a+rw /etc/fr24feed.ini
+	cp -n /etc/fr24feed.ini /usr/local/share/adsb-wiki
+	if ! grep host /etc/fr24feed.ini &>/dev/null; then sed -i -e '/fr24key/a host=' /etc/fr24feed.ini; fi
+	sed -i -e 's/receiver=.*/receiver="beast-tcp"\r/' -e 's/host=.*/host="127.0.0.1:30005"\r/' -e 's/bs=.*/bs="no"\r/' -e 's/raw=.*/raw="no"\r/' /etc/fr24feed.ini
+    systemctl restart fr24feed &>/dev/null
+fi
+
+if (( $(cat /etc/lighttpd/conf-enabled/* | grep -c -E -e '^server.stat-cache-engine *\= *"disable"') > 1 )); then
+    rm -f /etc/lighttpd/conf-enabled/88-readsb-statcache.conf
+fi
+
+systemctl enable readsb
+systemctl restart readsb

stage4/32-pisdr-dump1090/targets/configure_rbfeeder.sh

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+# configure rbfeeder to use readsb
+
+systemctl stop rb-feeder &>/dev/null
+
+rm -f /etc/lighttpd/conf-enabled/89-dump1090.conf
+
+apt-get remove -y dump1090-mutability &>/dev/null
+apt-get remove -y dump1090 &>/dev/null
+apt-get remove -y dump1090-fa &>/dev/null
+
+if [[ -f /etc/rbfeeder.ini ]]; then
+    if grep -qs -e 'network_mode=false' /etc/rbfeeder.ini &>/dev/null &&
+        grep -qs -e 'mode=beast' /etc/rbfeeder.ini &&
+        grep -qs -e 'external_port=30005' /etc/rbfeeder.ini &&
+        grep -qs -e 'external_host=127.0.0.1' /etc/rbfeeder.ini
+    then
+        sed -i -e 's/network_mode=false/network_mode=true/' /etc/rbfeeder.ini
+    fi
+    systemctl restart rbfeeder &>/dev/null
+fi

stage4/32-pisdr-dump1090/targets/disable.sh

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+systemctl disable --now readsb
+systemctl disable --now tar1090
+systemctl disable --now lighttpd

stage4/32-pisdr-dump1090/targets/enable.sh

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+systemctl enable --now readsb
+systemctl enable --now tar1090
+systemctl enable --now lighttpd