You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

README.md 1.4 KiB

6 years ago
6 years ago
6 years ago
6 years ago
6 years ago
6 years ago
6 years ago
6 years ago
123456789101112131415161718192021
  1. # NOAA Automated capture using Raspberry PI
  2. Most of the code and setup stolen from: [Instructables](https://www.instructables.com/id/Raspberry-Pi-NOAA-Weather-Satellite-Receiver/)
  3. ### New Features!
  4. - [Meteor M2 full decoding!](METEOR.md)
  5. - Nginx webserver to show images.
  6. - Timestamp and satellite name over every image.
  7. - WXToIMG configured to create several images (HVC,HVCT,MCIR, etc).
  8. - Pictures are posted to Twitter. See more at [argentinasat twitter account](https://twitter.com/argentinasat).
  9. - [Wiki](https://github.com/reynico/raspberry-noaa/wiki) is updated!
  10. - Audio files are stored on a RAMFS partition. Happen to had some glitches on image reception
  11. ### Install
  12. There's an [install.sh](install.sh) script that does everything at once. If in doubt, see the [Wiki's install and config page](https://github.com/reynico/raspberry-noaa/wiki/Initial-installation-and-configuration).
  13. ### Important notes
  14. - I tried to run this on a Raspberry PI Zero Wifi, no luck. Seems like it's too much load for the CPU. Running on a Raspberry PI 2+ is ok. See [Wiki's hardware notes page](https://github.com/reynico/raspberry-noaa/wiki/Hardware-notes).
  15. - Code was a bit updated on how it handles the UTC vs timezone times.
  16. ### To do
  17. - [Calculate sun elevation for each satellite pass to decide image enhancement](https://github.com/reynico/raspberry-noaa/commit/e21abc616b289a768129006863e48f0c815814b9) done.