Nie możesz wybrać więcej, niż 25 tematów Tematy muszą się zaczynać od litery lub cyfry, mogą zawierać myślniki ('-') i mogą mieć do 35 znaków.
 
 
 
 
 
 

2.3 KiB

Raspberry NOAA

This project now includes full reception and decoding of SSTV transmissions from the ISS.

ISS reception and scheduling

Reception is quite easy: The ISS TX works on 145.800 Mhz, Narrow FM. So we just need to tune our RTLSDR receiver and that’s all.

Scheduling is governed by the SCHEDULE_ISS inside .noaa.conf. Setting it to true will schedule future ISS passes.

ISS decoding

This is the difficult part: Decoding PD120 needs custom software. Right now the best Linux software for SSTV (in mu humble opinion) is QSSTV. QSSTV is great, works with a lot of modes, has auto slant and signal detection. On the other hand, QSSTV only works in GUI mode as it’s written in QT (hence Q-SSTV) and that’s not situable for this project as we don’t run any Window Server.

Surfing the Internet I’ve found Martin Bernardi’s (and team) final work about a PD120 modulator - demodulator so I put hands on slightly modifying it to adjust the project to my needs.

Decoding behavior

There are a few things to take care about

  1. A single ISS pass during a SSTV event could have zero to three SSTV transmissions (based on an average pass time of 10 minutes) so we need to find a way to detect the transmission header to fire up the decoder and store each image.

PD 120 header

  1. A simple way to detect the header on an audio file (once digitized with scipy.io) is to sample the header as an absolute numeric representation, apply a threshold during certain amount of time. So if the header is present, mark the stream and do the same for each new header that ocurrs in about this_timestamp + 120 seconds so we don’t get any false positives in the middle of the PD120 carrier.

  2. A Satellite transmission to the earth has doppler efect so the frequency changes over the time. This is a problem when you plot audio as data. So I had to include a high pass filter to remove the DC offset from the audio recorded by rtl_fm.

Upgrading procedure

There’s a migration script that handles the required modifications over the database as well as the web files. Take in mind that you need to have the web panel version of raspberry-noaa running.

  1. cd /home/pi/raspberry-noaa
  2. git fetch -pt && git pull
  3. cd migrations/
  4. ./20201292-iss.sh